M-Bus Gateway

Return to BTU Meters

PiiGAB M-Bus 800 is a gateway/converter series designed for remote reading of M-Bus meters using local network, city network or Internet. 810 has front connectors for both Ethernet and serial communication.

The gateway 810 is designed to transparently read all types of meters which support the M-Bus standard using Ethernet and TCP or UDP. The gateway translates the electrical signals of M-Bus to Ethernet. The M-Bus messages are read by standard software e.g. SCADA-system, remote reading program, configuration program, databases etc.

A driver for COM-port redirection is included which turns the 810 M-Bus port to be a virtual communication port at your computer. This means that most M-Bus programs on the market can be used independently if they have support for Ethernet or not.

The gateway may be remotely configured using the built-in web-interface or Telnet. With the configuration program 810 can be configured directly at site using a serial connection. The latter method ensures the highest possible level of security. The Telnet setup makes the gateway operative system independent, which means e.g. Linux may be used.

M-Bus 810 is available as a 5, 20 or 60 device master. There are four parallel M-Bus terminals using the same physical interface.

PDF Files

Techical Brochure

Manual